⚡ Lighting System

LED Downlight

An LED downlight is a recessed ceiling luminaire that directs light downward for general or task lighting. It is valued for a flush appearance, good efficacy, and long service life in residential ceilings.

Request a quote Estimate quantities

⚠️ Note: IP rating and bathroom-zone suitability must be verified per model and per local wiring regulations; values shown are typical/indicative, not model-specific.

Typical specification

Property	Typical value
Type	Recessed LED downlight (fixed or adjustable/gimbal), integrated or module-based
Typical power	Approx. 5-20 W (indicative)
Lumen output	Approx. 400-1800 lm depending on wattage (typical)
Color temperature	Commonly 2700K, 3000K, 4000K; some CCT-selectable (typical)
IP rating	IP20 for general ceilings; IP44/IP65 rated versions for bathrooms (verify per model)
Driver/dimming	Constant-current LED driver; dimmable versions support TRIAC, 0-10V or DALI
Standard	Aligns with regional lighting safety/EMC standards such as IEC/EN 60598 and IEC/EN 61347 for drivers (market-dependent)

Indicative / typical values for planning — actual products vary by manufacturer and standard. Confirm the final spec sheet before ordering; we do not publish fixed prices, request a quote for current offers.

Applications

General ceiling lighting, corridors, kitchens, and task lighting in living areas; IP-rated versions for bathroom ceilings.

What to specify when you request a quote

Cut-out diameter and ceiling void depth
Wattage, lumen output, and color temperature
Dimming requirement and compatible dimmer type
IP rating where used in bathrooms or damp areas

Related in Lighting System

Ceiling Light LED Strip Track Light Outdoor Light ← All lighting system

FAQ

Can LED downlights be used in bathrooms?

Only fittings with a suitable IP rating (commonly IP44 or IP65) should be used in bathroom zones, and the required rating depends on proximity to water. Confirm the zone requirements for the destination market.

Are LED downlights dimmable?

Many are, but only models specified as dimmable and paired with a compatible dimmer and driver. Non-dimmable units may flicker or fail if placed on a dimmer circuit.

Request a LED Downlight quote

Send your sizes and quantities (or your floor plan) — our team specs and supplies against it.

Get a Quote