An anti-odor floor drain combines drainage with an odour barrier, using a water seal, a mechanical one-way insert (such as a silicone flap, magnetic or gravity valve), or both. It is aimed at bathrooms and utility areas prone to sewer smells, including installations where a deep water seal is hard to maintain. Units are commonly tested to EN 1253.
| Property | Typical value |
|---|---|
| Material | Stainless steel, brass or engineering plastic (indicative) |
| Type | Point floor drain with anti-odor insert |
| Flow capacity | Typically ~0.4-0.8 L/s (indicative, varies by insert/size) |
| Trap type | Water seal and/or mechanical one-way barrier (flap, magnetic, gravity) |
| Outlet size | Commonly DN50 / DN75 (50/75 mm) |
| Standard | EN 1253 (or regional equivalents) |
Indicative / typical values for planning — actual products vary by manufacturer and standard. Confirm the final spec sheet before ordering; we do not publish fixed prices, request a quote for current offers.
Residential bathrooms, laundry and utility rooms, and low-use floor drains where the water seal can dry out and let odours pass; the mechanical insert helps block smells when the trap is dry.
Send your sizes and quantities (or your floor plan) — our team specs and supplies against it.
Get a Quote