A linear drain is an elongated channel drain, usually stainless steel, set at a wall or across a shower to collect water along its length. Its slim slot or grate suits large-format tiles and single-slope, kerb-free wet-room floors. It uses a water-seal or dry trap and is commonly tested to EN 1253.
| Property | Typical value |
|---|---|
| Material | Stainless steel channel and grate (indicative) |
| Type | Linear / channel drain (slot or removable grate) |
| Flow capacity | Typically ~0.6-1.5 L/s (indicative, varies by length/outlet) |
| Trap type | Water seal or mechanical/dry insert |
| Outlet size | Commonly DN50 / DN70, horizontal or vertical (indicative) |
| Standard | EN 1253 (or regional equivalents) |
Indicative / typical values for planning — actual products vary by manufacturer and standard. Confirm the final spec sheet before ordering; we do not publish fixed prices, request a quote for current offers.
Barrier-free (kerb-less) showers and wet rooms, especially with large-format tiles requiring a single floor slope; also used at wall junctions for discreet drainage.
Send your sizes and quantities (or your floor plan) — our team specs and supplies against it.
Get a Quote