XLPE cable uses cross-linked polyethylene insulation, giving a higher temperature rating and better current capacity than PVC. It is common for power distribution and feeder circuits, often in 0.6/1kV and higher voltage classes. Selection and sizing follow the relevant IEC, BS, or EN standards.
| Property | Typical value |
|---|---|
| Conductor | Copper or aluminium (solid or stranded) |
| Insulation | XLPE (cross-linked polyethylene) |
| Voltage rating | Typically 0.6/1kV for low voltage; higher classes available for MV |
| Common sizes | Typically 1.5 mm² up to several hundred mm² for power feeders |
| Cores | Single-core or multi-core; often with steel wire/tape armour |
| Temperature rating | Typically 90°C continuous conductor temperature |
| Standard | IEC 60502, BS 5467, BS 6724, or equivalent EN standards |
Indicative / typical values for planning — actual products vary by manufacturer and standard. Confirm the final spec sheet before ordering; we do not publish fixed prices, request a quote for current offers.
Used for low- and medium-voltage power distribution, sub-mains, and feeder circuits, including armoured versions for buried or exposed runs. Suited to installations needing higher current capacity or temperature margin.
Send your sizes and quantities (or your floor plan) — our team specs and supplies against it.
Get a Quote