A gate valve is an isolation valve that raises or lowers a flat or wedge-shaped gate to open or close flow. It is designed for fully open or fully closed service, offering low resistance when open, and is used for main-line shut-off rather than flow regulation.
| Property | Typical value |
|---|---|
| Type | Multi-turn, on/off isolation |
| Material | Brass, bronze, or cast iron body; metal or resilient seat |
| Common sizes | DN15–DN50 (1/2"–2") typical residential |
| Working pressure | Typically up to PN16 (indicative; confirm against datasheet) |
| Temperature range | Typically up to ~120 °C for water service (varies by seat) |
| Connection | Threaded, solder, or flanged |
| Standard | Commonly to EN 1074 / MSS or DIN design norms (varies) |
Indicative / typical values for planning — actual products vary by manufacturer and standard. Confirm the final spec sheet before ordering; we do not publish fixed prices, request a quote for current offers.
Used for main water supply isolation, riser and branch shut-off, and irrigation lines where a valve is opened or closed infrequently and low flow resistance is wanted when fully open.
Send your sizes and quantities (or your floor plan) — our team specs and supplies against it.
Get a Quote